View Full-Size Image
  |
Grundfos MTP75 Motor Protection System
|
Price:
AUD$150.00
|
Product #: 1271 |
|
"Application and Installation
• The MTP 75 can be used only for Grundfos motors with built-in temperature transmitter .
• The MTP 75 may be installed in any type of panel containing a thermal overload with differential release and
contactor. The thermal relay is necessary to protect against locked rotor or phase failure, since these failures will
cause the temperature to rise much faster than the MTP 75 is able to register.
• The MTP 75 is supplied with base for mounting on DIN rail.
Operation
The temperature transmitter in the motor will send a high-frequency signal indicating the motor temperature through the
power cable. The MTP 75 will stop the motor via the contactor if the temperature rises above 75°C. The temperature
limit is factory-set and cannot be changed."
Specifications:
- Condition: New
- Type: Electric Motor Protection System
- Make: Grundfos
- Series: MTP75
- Model: 625178
- Serial: P100580828
- Included: MTP75, base, capacitor, Signal Transformer
- Notes: This unit is not required if a Grundfos CU3 is installed.
- Weight: 0.9kg
Replacement price on this unit is approximately AUD$.
The unit is sold with a Works on Arrival Warranty.
|
| Ask a question about this product |
In Stock:
1
|
|
|
|
|
